European Standards Reference Index
EN Standards for Industrial Materials
A procurement-focused index connecting current European product and inspection-document standards with stainless steel, duplex steel, nickel alloys and pressure-purpose product forms.
Reference policy
Verified Editions, Official Access and Procurement Use
This page provides original MNK-G.S.A summaries and links to records published by an official national standards body. A BS EN publication is the United Kingdom adoption of the corresponding European Standard; the underlying EN designation is used in the index.
Standard identity, edition, amendments, product form, grade and inspection-document requirements must be checked for every inquiry. A status marked “under review” remains current until replaced, but it requires a fresh status check at quotation stage.
Phase 1 index
Stainless, Duplex, Nickel and Pressure-Purpose References
The first EN index phase focuses on the material families and product forms already published on mnkmetals.com. Titanium, molybdenum and cemented-carbide references will be expanded through their applicable EN, EN ISO and DIN families only after each designation and edition is verified.
EN 10088-1:2023
Stainless steels — List of stainless steels
Current. Lists stainless-steel designations and chemical compositions, including austenitic-ferritic (duplex) grades.
EN 10088-2:2024
Stainless steels — Sheet, plate and strip
Current. Technical delivery conditions for hot- or cold-rolled sheet, plate and strip of corrosion-resistant stainless steels for general purposes.
EN 10088-3:2023
Stainless steels — Bars, rods, wire, sections and semi-finished products
Current. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion-resistant stainless steels.
EN 10216-5:2021
Seamless stainless-steel tubes for pressure purposes
Current and under review. Covers seamless circular tubes made of austenitic and austenitic-ferritic stainless steels for pressure and corrosion-resisting service.
EN 10217-7:2021
Welded stainless-steel tubes for pressure purposes
Current and under review. Covers welded circular tubes made of austenitic and austenitic-ferritic stainless steels for pressure and corrosion-resisting service.
EN 10272:2016
Stainless-steel bars for pressure purposes
Current. Technical delivery conditions for hot- and cold-formed stainless-steel bars used in pressure equipment.
EN 10222-5:2017
Stainless-steel forgings for pressure purposes
Current and under review. Covers martensitic, austenitic and austenitic-ferritic stainless-steel forgings for pressure equipment.
EN 10253-4:2025
Austenitic and duplex stainless-steel butt-welding fittings
Current edition identified by the official national-standards record. Applies to wrought austenitic and austenitic-ferritic stainless-steel butt-welding fittings with specific inspection requirements.
EN 10269:2013
Steels and nickel alloys for high- or low-temperature fasteners
Current and under review. Covers semi-finished products, bars and rods for fasteners with specified elevated- and/or low-temperature properties.
EN 10213:2007+A1:2016
Steel castings for pressure purposes
Current and under review. Covers steel castings for pressure-containing parts, including relevant stainless and duplex casting families.
EN 10204:2004
Metallic products — Types of inspection documents
Current. Defines inspection-document types used with metallic-product deliveries. The required document type must be specified at inquiry and order stage. For steel-product certificate fields, see the EN 10168:2004 procurement guide.
General Delivery Conditions
EN 10021:2006
General technical delivery conditions for steel products, coordinated with the purchase order, product standard and inspection-document route.
Detailed EN Product-Form References
Original MNK-G.S.A procurement summaries explain where each standard fits, which product form it controls and what ordering data must be confirmed. They do not reproduce or replace the protected standards.
EN 10088-2:2024
Stainless steel sheet, plate and strip for general purposes.
EN 10088-3:2023
Semi-finished products, bars, rods, wire, sections and bright products.
EN 10216-5:2021
Seamless stainless steel tubes for pressure purposes.
EN 10217-7:2021
Welded stainless steel tubes for pressure purposes.
EN 10272:2016
Stainless steel bars for pressure purposes.
EN 10222-5:2017
Stainless steel forgings for pressure purposes.
EN 10253-4:2025
Wrought austenitic and duplex stainless steel butt-welding fittings with specific inspection requirements.
German national editions: DIN EN publications adopt the corresponding EN standard unchanged. Publication date and language may differ. Use the DIN Standards Library to identify the national designation and official DIN record.
Copyright and access
Official Publications Remain with the Standards Publisher
MNK-G.S.A does not reproduce protected standard text, tables or technical requirements. The official record and licensed publication remain the governing source. This index supports inquiry preparation and does not replace the purchased standard.
MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com
Temperature-Service Fastener Materials
EN 10269 covers defined semi-finished products, bars and rods for fasteners with specified elevated- and/or low-temperature properties. It is a material/product route and does not replace the finished-fastener dimensional standard.
Specify the Governing EN Standard
Send the EN designation and edition together with the material grade, product form, dimensions, quantity, inspection-document type and delivery destination.