MOLYBDENUM–RHENIUM ALLOYS & SPECIALIZED COMPONENTS
MoRe Molybdenum–Rhenium Alloys
Composition-controlled sourcing for MoRe wire, rod, tubing, sheet, foil, plate and custom parts.
MNK-G.S.A sources molybdenum–rhenium material by exact rhenium content, product form, dimensions, condition, application requirements, inspection documents and destination.
Rhenium Content Must Be Confirmed
A specialist manufacturer publishes 47.5% rhenium as a standard MoRe alloy, but other compositions may exist for specific processes or applications. The exact Mo/Re ratio and manufacturer specification must be confirmed before material identity or interchangeability is accepted.
Material Definition and Supply Scope
Mo–47.5%Re
Manufacturer-published standard composition used in wire, tubing and other refractory-metal forms. Exact chemistry and condition are certificate-controlled.
Wire and Flat Wire
Round and flat wire sourced by composition, diameter or cross-section, finish, spool or coil, mechanical properties and application.
Rod and Bar
Long products sourced by exact MoRe composition, diameter, length, surface condition, tolerance and downstream machining requirements.
Sheet, Foil and Plate
Flat products sourced by composition, thickness, width, length, condition, surface and grain-direction requirements.
Seamless Tubing
Thin-wall and other MoRe tubing sourced by outside diameter, wall, length, concentricity, finish and required inspection.
Custom Components
Electronic, furnace, aerospace and specialized parts manufactured to drawing after material and process feasibility review.
Typical Global Sourcing Range
The ranges below represent typical global sourcing and manufacturing capability across specialist sources. They are not MNK stock and do not describe one universal factory envelope.
| Product Form | Typical Global Sourcing Range | Notes |
|---|---|---|
| Wire | From approximately Ø0.025 mm | No unsupported universal upper limit is claimed. |
| Rod / Bar | Specialist manufacture to approximately Ø150 mm | Maximum diameter, length and condition are composition-specific. |
| Plate / Sheet / Foil | Custom dimensions on request | Thickness, width and length depend on rhenium content and route. |
| Tubing / Custom Parts | According to specification or drawing | Geometry, condition and inspection are confirmed individually. |
MoRe14, MoRe41, MoRe44.5 and MoRe47.5 require composition-specific source confirmation.
Actual availability depends on grade, specification, quantity, tolerances, certification requirements and manufacturing source. Diameter, thickness, width and length must be confirmed as one complete combination.
Standards and Documentation
Manufacturer Specification
MoRe product identity is normally governed by the selected manufacturer datasheet or customer specification, including exact rhenium content and product condition.
No Universal ASTM Grade
The shorthand MoRe or Mo47.5Re is not presented as a universal ASTM mill-product grade unless the customer provides an applicable standard and scope.
Application Requirements
Critical electronics, aerospace, medical or nuclear-related inquiries may require additional material, process, traceability and qualification controls.
EN 10204:2004
A European inspection-document type may be requested, subject to the manufacturer’s ability to provide agreed chemistry, properties and traceability.
EN / DIN Equivalence
No generic EN or DIN designation is assumed equivalent to a commercial MoRe alloy. Exact documents and customer approvals govern any substitution.
Certificate Review
Composition, heat or lot traceability, product form, dimensions, condition and agreed test results are checked before shipment.
Application Context
Electronics and Instrumentation
Wire, grids, emitters and other components where the exact alloy composition and process condition govern performance.
Furnace and Aerospace
High-temperature structural or thermal-shock applications developed around an approved MoRe grade and component design.
Special Tubing and Parts
Thin-wall tubes and precision components for demanding industrial, research or medical applications subject to qualification.
Capability Note
Published dimensional ranges describe demonstrated manufacturing capability across specialist sources, not guaranteed stock and not one universal mill envelope. Diameter, thickness, width, length, condition, tolerance and quantity must be confirmed as one complete combination for each inquiry.
Send Your MoRe Molybdenum–Rhenium Alloys Inquiry
Provide the material grade or composition, governing specification, product form, complete dimensions, quantity, inspection-document requirements and delivery destination.