TITANIUM FILLER METAL · DOCUMENT-CONTROLLED SOURCING
ERTi-2 Titanium Welding Consumables
Technical sourcing of ERTi-2 titanium solid wire and rods by AWS classification, process, diameter, cleanliness, packaging and certificate requirements.
MNK-G.S.A coordinates specialist titanium welding-consumable inquiries for marine, heat-exchanger, piping, equipment and industrial fabrication projects. Sources and verification scope
Classification Identity
- AWS A5.16/A5.16M:2023 is the reference specification for titanium and titanium-alloy welding electrodes and rods.
- DAIKO lists DAIKOWT Ti 2 rods for GTAW and DAIKOWM Ti 2 solid wire for GMAW, both with the AWS A5.16 ERTi-2 classification.
- ISO 24034:2020 remains published and was confirmed in 2026.
- The selected DAIKO product range does not state an EN ISO designation. No exact ISO equivalence is claimed here; obtain the required designation and certification edition for the offered product.
Standards and Supply Definition
| AWS classification | ERTi-2 in the DAIKO product listings; reference specification AWS A5.16/A5.16M:2023. Confirm the certification edition for the offered batch. |
|---|---|
| ISO reference | ISO 24034:2020, confirmed in 2026; exact EN ISO product designation is not stated in the selected manufacturer range |
| Named product forms | DAIKOWT Ti 2: GTAW/TIG rods. DAIKOWM Ti 2: GMAW/MIG solid wire. Product and process must match the approved WPS. |
| Published packaging examples | DAIKOWT Ti 2: 5 kg carton tube. DAIKOWM Ti 2: drums or B300, D200 and D100 spools. Confirm diameter, rod length, package mass and availability; these are not stock commitments. |
| Process controls | Clean joint and filler surfaces; inert-gas protection of hot metal, including the weld and reverse side as required by the approved WPS |
| Ordering requirements | Base-metal grade, classification, process, dimensions, surface condition, batch traceability, certificate, approvals, quantity and delivery destination |
Application Context
DAIKO associates these ERTi-2 products with commercially pure titanium, including Grade 2. Titanium is sensitive to contamination during welding: preparation, cleanliness and inert-gas shielding must be controlled by the approved procedure. Final selection depends on the actual base material, WPS/PQR, design requirements and service conditions.
RFQ and Quality Controls
- Exact titanium base-material grade and condition
- AWS classification and any required ISO designation
- Welding process, diameter, package and surface condition
- Approved cleaning, inert shielding and WPS controls
- Batch certificate, traceability, approvals, quantity and destination
Related Technical Pages
Technical Sources and Scope
Reference editions checked on 27 September 2026: AWS A5.16/A5.16M:2023 and ISO 24034:2020. ISO records confirmation in 2026. Links identify the standards without reproducing their protected requirements.
Manufacturer evidence is separated by product: DAIKOWT Ti 2 for GTAW rods and DAIKOWM Ti 2 for GMAW wire. Packaging examples come from those product pages; the Grade 2 range supports the application context.
The selected manufacturer range leaves the EN ISO field unspecified. Do not infer an exact mapping or batch compliance from a general standard reference. Request the offered product documents and required approvals.
- AWS A5.16/A5.16M:2023: official scope
- ISO 24034:2020: official status
- DAIKO: Grade 2 range and application context
- DAIKO: DAIKOWT Ti 2 GTAW rods
- DAIKO: DAIKOWM Ti 2 GMAW wire
Packaging mass is maintained in the shared technical registry. This check covers the DAIKOWT Ti 2 carton tube only, not other product dimensions, standard editions or stock availability.
DAIKO - DAIKOWT Ti 2 packaging (Undated product page; Packaging Type and Packaging checked 2026-10-15, p. Product page: Packaging Type / Packaging)Relevant ISO Reference
Use the current authorised ISO publication together with the governing specification, manufacturer documentation and project requirements. A reference link alone does not establish grade equivalence, product compliance or application approval.
Send Your Technical Inquiry
Send the base material, filler classification, welding process, approved WPS or project standard, diameter, package, quantity, documentation requirements and delivery destination.