ASTM Standard Reference · Nickel Alloys
ASTM B575-17(2023)
Low-Carbon Nickel-Chromium-Molybdenum Alloy Plate, Sheet, and Strip Families
Reference status
Standard at a Glance
Publication Status
Active; reapproved in 2023 and last updated 28 April 2023.
Material Family
Low-carbon nickel-chromium-molybdenum and related alloy families.
Product Forms
Plate, sheet and strip for general corrosive service.
Publisher
ASTM International. The official record and purchased standard are authoritative.
Scope
What This Standard Covers
ASTM B575-17(2023) covers flat products in multiple low-carbon nickel-chromium-molybdenum and related alloy families intended for general corrosive service.
The specification distinguishes plate from sheet and strip and addresses ordered condition, composition, mechanical properties, grain-size requirements where applicable and dimensional requirements.
Covered materials
Alloys, Conditions and Product Forms
Only the UNS numbers listed by the governing edition are within scope. Commercial alloy names must be checked against the requested UNS designation.
- UNS N10276, N06022, N06035, N06044, N06455, N06058 and N06059;
- UNS N06200 nickel-chromium-molybdenum-copper alloy;
- UNS N10362 nickel-molybdenum-chromium alloy;
- UNS N06210 tantalum-containing alloy and UNS N06686 tungsten-containing alloy;
- sheet and strip are ordered hot- or cold-rolled and solution annealed; plate is hot- or cold-rolled, solution annealed and descaled, subject to the standard.
Inquiry preparation
Ordering and Verification Points
Prepare the inquiry against the governing project specification. State:
- the full ASTM designation and required edition;
- the exact UNS number and ordered heat-treatment or product condition;
- product form, dimensions, tolerances, surface requirements and quantity;
- inspection-document type, tests, supplementary requirements and acceptance criteria;
- drawing references, packing instructions and delivery destination.
Cross-reference
Relationship to Other Standards
ASTM B574 addresses rod and bar for related alloy families. Other ASTM specifications govern pipe, tube, forgings or welding products; the flat-product designation must not be applied to those forms.
Shared commercial names do not establish equivalence. Any comparison with EN, ISO, DIN, manufacturer grades or project specifications must be verified from governing technical documents and certificates.
Access
Copyright and Official Publication
MNK-G.S.A does not reproduce the copyrighted ASTM document, protected tables or acceptance limits on this page. This is an original procurement reference. Obtain the governing publication directly from ASTM International.
MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com
Related MNK pages
Continue in the Technical Library
Source Against the Required ASTM Standard
Send the designation, UNS number, product form, dimensions, condition, quantity, inspection-document requirements and delivery destination.
Related Nickel-Alloy Forging Route
ASTM B575 governs its listed flat products; forgings require a separate product-form specification such as ASTM B564 when the exact UNS grade is covered.