Refractory-Metal Sourcing Guide
Tungsten & Molybdenum Size Ranges — How to Read a Global Sourcing Envelope
Published tungsten and molybdenum dimensions are useful only with their product form, source and conditions. They are not an MNK stock list or evidence that separate minimum and maximum dimensions can be ordered together.
How to read a sourcing range
Use named, product-specific source data to assess a proposed order. Distinguish a catalogue example from a complete manufacturing range and from current availability. A source that gives thickness alone does not establish width and length; an undated range is not a delivery commitment.
It does not mean that MNK holds every size in stock, that one factory makes the entire range or that today’s availability is guaranteed before a manufacturer confirms the complete requirement.
A Range Is Not One Guaranteed Size Combination
| Published statement | Correct reading | Still to be confirmed |
|---|---|---|
| S-T molybdenum rod examples: Ø5 mm, Ø6 mm, Ø8 mm with 1000 mm, 2000 mm or 3000 mm lengths; Ø30 mm, Ø40 mm, Ø50 mm with 1000 mm or 1500 mm lengths. | These are selected diameter-dependent catalogue combinations. The 3000 mm option does not extend to every listed diameter or to other molybdenum alloys. | Maximum length at the requested diameter, condition and tolerance. |
| Elmet tungsten categories: foil 0.0016–0.0049 in; sheet 0.005–0.187 in; plate 0.1875–1.575 in. | At 25.4 mm/in these are 0.04064–0.12446 mm, 0.127–4.7498 mm and 4.7625–40.005 mm respectively. These are separate thickness categories, not evidence of maximum width and length. | The complete thickness, width, length, condition and flatness combination. |
| Custom parts according to drawing | No universal size table is appropriate. | Starting stock, geometry, tolerances, inspection, quantity and manufacturing route. |
Sources for the dimensional examples
The table uses diameter-dependent molybdenum rod combinations from S-T and separate tungsten thickness categories from Elmet. These undated product pages were checked on 15 October 2026; this is the source-check date, not a publication date.
S-T — molybdenum rod catalogue combinations: S-T - Molybdenum rod in standard dimensions (Undated web catalogue; Molybdenum rod in standard dimensions checked 2026-10-15, p. Rod Length columns; 3000 mm only in its listed diameter rows)
Elmet Technologies — tungsten foil, sheet and plate thickness categories: Tungsten Sheet / Plate (Undated public product page; checked 2026-10-15, p. Tungsten Sheet / Plate Sizes)
Rod and Wire: Diameter Controls Length
Fine wire may be supplied continuously on spools, while larger wire and rod are supplied in straight lengths. Greater diameter, tighter straightness tolerances, grinding allowance or dimensional accuracy can limit achievable length. A long length published for a small diameter must not be transferred to the largest diameter in a range.
- State the exact diameter or cross-section.
- Specify finished length, random length or spool requirement.
- Define straightness, diameter tolerance and surface condition.
- Separate micro rod, drawn wire and general bar when their manufacturing routes differ.
Foil, Sheet and Plate: Thickness Controls Format
The thinnest foil, widest sheet and thickest plate normally come from different processing routes and may come from different manufacturers. Width, length, flatness, rolling direction, surface condition and heat-treatment condition must therefore be checked at the requested thickness.
Never combine the minimum thickness, maximum width and maximum length into one implied product unless the complete combination has been confirmed.
Material and Production Route Change the Envelope
Material Variables
- Pure metal or alloy composition
- Powder-metallurgy or melted route
- Worked, stress-relieved or recrystallized condition
- Grade-specific certification requirements
Commercial Variables
- Minimum production quantity
- Standard mill size or custom production
- Machining and inspection allowance
- Current production schedule and destination
How MNK-G.S.A qualifies published ranges
- Traceable example: name the source and product, retain the complete published combination and state the document date or absence of a revision date.
- Partial data: identify the missing dimensions, condition or inspection basis. Do not fill the gaps by combining unrelated catalogue maxima.
- Unverified or conflicting limits: request a current material-specific datasheet and confirm the order combination instead of publishing the disputed range as established capability.
This approach keeps the website useful for preliminary engineering while preventing a benchmark from becoming an unsupported promise of stock or production capacity.
Information Needed to Check a Size
- Material, grade, composition and governing specification
- Product form and all dimensions as one complete combination
- Tolerances, straightness, flatness, condition and surface finish
- Quantity or weight, including repeat-demand expectation
- Inspection documents and test requirements
- Delivery destination and required date
Related MNK-G.S.A Material Pages
Send the Complete Size Combination
MNK-G.S.A will check the requested material, dimensions, tolerances, quantity and documentation against suitable specialist manufacturing sources.
MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com
