TECHNICAL LIBRARY · ISO PROCUREMENT REFERENCE
ISO 6892-3:2015 — Tensile Testing at Low Temperature
Procurement reference for tensile testing of metallic materials at low temperature.
Edition control: Published first edition, April 2015; last confirmed in 2020. The latest review stage closed on 2025-12-03 (90.60). Confirm the current authorised edition and the governing product or order specification before use. This original MNK-G.S.A summary does not reproduce or replace the protected ISO publication.
Scope in Procurement
ISO 6892-3:2015 covers tensile testing of metallic materials in the range -196 to 10 °C.
Test-temperature range: -196 to 10 °C ISO 6892-3:2015; ISO. Scope of the low-temperature tensile-test method. Not a material service-temperature rating or a guarantee of low-temperature properties. Source: ISO 6892-3:2015: low-temperature tensile test scope (Edition 1, 2015-04; public abstract; current ISO record checked 2026-10-19, p. Public abstract: tensile method scope or ambient test conditions). Reviewed: 2026-10-19.
The order must identify the actual test temperature and the governing material or product requirement rather than requesting a generic cold test.
Temperature conditioning, specimen traceability and reporting must be aligned with the customer specification and authorised standard.
Scope Boundary
ISO still lists the 2015 edition as published. Closure of a review stage is not publication of a replacement edition; confirm the applicable edition before contractual use.
Ordering and Test-Report Controls
- Exact ISO edition and governing material or product standard
- Material grade, product form, delivery condition and batch identity
- Specimen location, orientation, preparation and number of tests
- Selected low-temperature tensile-test conditions and specimen temperature control
- Equipment verification, laboratory requirements and measurement traceability
- Result format, acceptance criteria, retest procedure and inspection document
Official Publication and Access Policy
Official record: ISO 6892-3:2015 at ISO. Obtain authorised content through ISO or an authorised standards provider. Protected clauses, tables, figures, test parameters and acceptance values are not reproduced here.
Send Your Standards-Based Inquiry
Send the material grade, product form, dimensions, quantity, governing standard, test condition, inspection-document requirements and delivery destination.
MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com
Technical Sources & Revision
Source: ISO. ISO 6892-3:2015
Document / edition: ISO 6892-3:2015
Source used for: The public ISO catalogue record supports the document identity, publication status and scope summary on this page. It is used for the stated material or product coverage and the named classification, inspection or test method, where applicable. It does not establish numerical acceptance limits or certify a supplied product.
Technical source review:
Review scope: the public publisher record and this procurement summary, not a clause-by-clause audit of the full standard. Use the governing publication, purchase specification and product or test documentation for acceptance.