TECHNICAL LIBRARY · ISO PROCUREMENT REFERENCE

ISO 6508-1:2023 — Rockwell Hardness Test Method

Procurement reference for Rockwell regular and superficial hardness testing of metallic materials.

Edition control: Published fifth edition, December 2023. Confirm the current authorised edition and the governing product or order specification before use. This original MNK-G.S.A summary does not reproduce or replace the protected ISO publication.

Scope in Procurement

ISO 6508-1:2023 specifies Rockwell regular and superficial hardness test methods for the scales included in its official scope.

The selected scale and test condition must suit the material, product thickness, expected hardness and governing product specification.

The test report should identify the scale, specimen or product location, result, equipment control and traceability required by the order.

Scope Boundary

Specific material or product standards may direct another method. A Rockwell value alone does not establish composition, microstructure or grade equivalence.

Ordering and Test-Report Controls

  • Exact ISO edition and governing material or product standard
  • Material grade, product form, delivery condition and batch identity
  • Specimen location, orientation, preparation and number of tests
  • Selected Rockwell scale and test conditions
  • Equipment verification, laboratory requirements and measurement traceability
  • Result format, acceptance criteria, retest procedure and inspection document

Official Publication and Access Policy

Official record: ISO 6508-1:2023 at ISO. Obtain authorised content through ISO or an authorised standards provider. Protected clauses, tables, figures, test parameters and acceptance values are not reproduced here.

Send Your Standards-Based Inquiry

Send the material grade, product form, dimensions, quantity, governing standard, test condition, inspection-document requirements and delivery destination.

MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com

Technical Sources & Revision

Source: ISO. ISO 6508-1:2023

Document / edition: ISO 6508-1:2023

Source used for: The public ISO catalogue record supports the document identity, publication status and scope summary on this page. It is used for the stated material or product coverage and the named classification, inspection or test method, where applicable. It does not establish numerical acceptance limits or certify a supplied product.

Technical source review:

Review scope: the public publisher record and this procurement summary, not a clause-by-clause audit of the full standard. Use the governing publication, purchase specification and product or test documentation for acceptance.

Back to top