TECHNICAL LIBRARY · ASTM PROCUREMENT REFERENCE

ASTM F364-96(2025) — Molybdenum Flattened Wire

Procurement reference for specified molybdenum flattened-wire grades intended for electron-tube applications.

Edition control: Active; ASTM F364-96 reapproved in 2025. This original MNK-G.S.A summary does not reproduce or replace the protected ASTM publication. Confirm the current authorised edition and governing order documents before use.

Scope in Procurement

ASTM F364-96(2025) covers two UNS-designated molybdenum flattened-wire types made for electron-tube applications.

The product route includes controlled chemistry together with hardness, temper, bending, delamination, dimensional and surface requirements within the standard’s defined size envelope. Inch-pound values govern; SI conversions are informational only.

The specification is not a general standard for every molybdenum strip, ribbon, round wire or flat custom part. The exact UNS type and electron-tube scope must govern the order.

Product formFlattened molybdenum wire
Material classificationTwo defined UNS grades
Application contextElectron tubes
Scope boundaryNot a universal molybdenum strip, ribbon or general wire specification

Source and technical review for this scope summary

Where This Standard Fits

  • Flattened molybdenum wire for electron tubes
  • UNS-specific electronic-component inquiries
  • Hardness, temper and bending-document control
  • Separating flattened wire from ordinary flat products or round wire

Ordering and Document Controls

  • Exact ASTM edition and UNS grade
  • Flattened-wire thickness, width and tolerances
  • Chemistry and manufacturing condition
  • Hardness, temper, bending and delamination evidence
  • Surface, coil or cut-length requirements
  • Inspection documents, quantity and delivery destination

Official Publication and Access Policy

Official record: ASTM F364-96(2025) at ASTM International. Obtain authorised content through the publisher or an authorised standards distributor. Protected clauses, tables, figures and acceptance values are not reproduced here.

Send Your Standards-Based Inquiry

Send the required material, grade, product form, drawing, dimensions, quantity, governing standard, inspection route and delivery destination. MNK-G.S.A will review the specification and coordinate a sourcing response.

MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com

Technical Sources & Revision

Source: ASTM International. ASTM F364-96(2025)

Document / edition: ASTM F364-96(2025)

Source used for: The public ASTM International catalogue record supports the document identity, edition and scope summary on this page. It is used for the stated material or product coverage and the named test or inspection method, where applicable. It does not establish product conformity or replace numerical requirements in the full publication.

Technical source review:

Review scope: the public publisher record and this procurement summary, not a clause-by-clause audit of the full standard. For acceptance, use the governing publication, purchase specification and product or test documentation.

Back to top