ASTM Standard Reference
ASTM F289-96(2025)
Molybdenum Wire and Rod for Electronic Applications
Reference status
Standard at a Glance
Publication Status
Active; reapproved in 2025 and last updated 12 March 2025.
Material Family
Commercially pure molybdenum for electronic applications.
Product Forms
Wire diameter <0.05 in (<1.27 mm) and rod diameter ≤1 in (≤25.4 mm), within the standard’s definitions. Inch-pound values govern; SI values are informational conversions. Apply the full standard definitions at boundary values.
Publisher
ASTM International. The official record and purchased publication are the authoritative sources.
Scope
What This Standard Covers
ASTM F289-96(2025) covers commercially pure molybdenum wire and rod intended for defined electronic uses. It separates wire and rod by both supply form and diameter.
The specification addresses composition, tensile properties, elongation, ductility, surface finish, dimensional tolerances and straightness. The complete limits remain in the official ASTM publication.
Procurement use
Materials and Product Forms
The standard defines three grades according to product form and intended electronic use.
- Grade 1 — commercially pure molybdenum wire for leads, hooks, supports, heaters and metal-to-glass seals;
- Grade 2 — commercially pure molybdenum wire intended for mandrel use, supplied black or cleaned;
- Grade 3 — commercially pure molybdenum rod for leads, hooks, supports and metal-to-glass seals;
- wire includes spooled or coiled product with diameter ≤0.05 in (≤1.3 mm) and short cut lengths with diameter ≤0.02 in (≤0.51 mm); rod is straight-length material with diameter >0.02 in (>0.51 mm), up to the standard’s limit.
Inquiry preparation
Ordering and Verification Points
A quotation should be based on the customer’s governing specification and the requirements stated in the inquiry, drawing, purchase order or project documentation. Include:
- the full ASTM designation and required edition;
- the material grade, alloy or manufacturing route stated by the project;
- the required product form, dimensions, tolerances, condition and surface requirements;
- quantity, inspection and test requirements, acceptance criteria and requested inspection documents;
- any supplementary requirements, drawing references, packing instructions and delivery destination.
Cross-reference
Relationship to Other Standards
ASTM B387/B387M covers molybdenum bar, rod and wire under a different material and product framework. The diameter, form and intended use determine which specification may be relevant; the project document must identify the governing standard.
Related designations are not automatically equivalent. Any comparison with EN, ISO, DIN, GOST, TU, manufacturer grades or customer specifications must be checked against the applicable technical documents and certificates.
Access
Copyright and Official Publication
MNK-G.S.A does not reproduce the copyrighted ASTM document, protected tables or acceptance limits on this page. The summary is an original procurement reference. Obtain the governing publication from ASTM International.
MNK-G.S.A | Industrial Procurement & Sourcing | mnkmetals.com | sales@mnkmetals.com
Related MNK pages
Continue in the Technical Library
Molybdenum & TZM Materials
Supply forms, sourcing scope and technical inquiry requirements for molybdenum materials.
Technical Library
Browse standards, specifications, datasheets and inspection-document guidance.
Source Against the Required Standard
Send the designation, grade, product form, dimensions, quantity, inspection-document requirements and delivery destination. MNK-G.S.A will verify the sourcing basis before quotation.
Technical Sources & Revision
Source checked:
ASTM International — ASTM F289-96(2025). Publisher record last updated: 12 March 2025.
The public publisher record was checked for the document edition and the scope covering molybdenum wire and rod for electronic applications. The grade, supply-form and unit distinctions remain governed by the applicable standard. This review is not a clause-by-clause check of the full publication or evidence of product conformity.
